Can the crystal head of the super six network cable be plugged into an ordinary jack?

　　The crystal head of the super six network cable generally cannot be plugged into the ordinary jack. This is mainly because the super six network cable has higher tranSMission performance and specification requirements than the ordinary network cable.

　　First of all, the bandwidth of the Super 6 network cable is 600MHz, and the standard transmission rate reaches 10Gbps, which is much higher than the performance of the ordinary network cable. In order to meet such high performance requirements, the crystal head of the Super 6 network cable (RJ-45 connector) also has higher standards in design and manufacture. These crystal heads usually have finer touchpoints and tighter manufacturing tolerances to ensure a good match and stable transmission with the Super 6 network cable.

　　Secondly, ordinary jacks (such as Category 5 or Category 6 jacks) may not meet the performance requirements of Super Category 6 cables in design and specifications. The touchpoint spacing, material selection, etc. of these jacks may not be compatible with the crystal head of Super Category 6 cables, resulting in reduced transmission performance or unstable connection.

　　Therefore, in order to ensure the best performance and stability of the Super 6 network cable, it is recommended to use a crystal head and jack specially designed for the Super 6 network cable. If you need to connect the Super 6 network cable to a normal device, you can consider using solutions such as adapters or converters, but these solutions may increase the cost and complexity, and may affect the transmission performance.

　　In order to ensure the best performance and stability of the Super 6 cable, it is recommended to follow the manufacturer's recommendations and specifications and use crystal heads and jacks specially designed for the Super 6 cable.