How to arrange the network cable connector cable?

　　There are two main international standards for the wiring of the network cable connector, that is, the wiring sequence of the network cable crystal head: T568A and T568B. The following is the detailed wiring sequence of these two standards:

　　T568A standard

　　The order of wiring from left to right (or from the spring end of the crystal head to the unspring end) is:

　　white and green

　　green

　　white orange

　　blue

　　white and blue

　　orange

　　White brown

　　brown

　　T568B standard

　　The order of wiring from left to right (or from the spring end of the crystal head to the unspring end) is:

　　white orange

　　orange

　　white and green

　　blue

　　white and blue

　　green

　　White brown

　　brown

　　wiring method

　　Direct line (parallel line):

　　It is used to connect different devices, such as computers and switches, routers and switches, etc.

　　The network cable crystal heads at both ends use the same wire sequence standard, that is, both T568A or T568B.

　　Cross line:

　　It is used to connect devices of the same type, such as a direct connection between computers (in some specific cases, such as when there is no switch or router).

　　The network cable crystal head at one end uses the T568A standard, and the network cable crystal head at the other end uses the T568B standard.

　　Precautions

　　During the wiring process, ensure that the wiring sequence is correct to ensure the stability and performance of the network connection.

　　When using wire tongs to peel off the outer skin of the wire, be careful not to cut the inner core.

　　When inserting the wires into the crystal head, make sure that each wire core is pushed to the top inner wall of the crystal head, and press the crystal head firmly.

　　When making a network cable connector, you can choose to use a network cable tester to detect the connectivity of the network cable to ensure successful production.

　　In general, the wiring sequence of the cable connector follows the T568A or T568B standard. The specific standard used depends on the purpose of the cable and the type of device connected. The correct wiring sequence and wiring method are essential to ensure the stability and performance of the network connection.