16 tubes can wear several Category 6 network cables

　　Regarding the 16mm PVC wire pipe can wear several six types of network cables, it mainly depends on the space utilization rate in the wire pipe and the specific specifications of the network cable.

　　Generally speaking, the cross-sectional area of the sixth type of network cable is large, so the number of threads in the line pipe will be limited. According to the publicly released information, the cross-sectional area of the sixth type of network cable is about 30.1754 square millimeters, and its external square area is about 38.44 square millimeters. The inner diameter of the 16mm diameter PVC line pipe is about 16mm, and its cross-sectional area is about 201 square millimeters.

　　When considering threading in a wire pipe, a principle of space utilization is usually followed to avoid signal interference or threading difficulties caused by overcrowding. Common space utilization rates include 25%, 30% and 40%, etc. Based on these utilization rates, we can calculate the number of six types of network cables to be threaded in a 16mm PVC wire pipe:

　　At 25% utilization, the 16mm wire pipe can fit about 1 class 6 network cable (201 square millimeters * 0.25/38.44 square millimeters). 1.3 roots, but take an integer when actually threading, that is, 1 root).

　　At a 30% utilization rate, about 1 type 6 network cable can also be worn (201 square millimeters * 0.30/38.44 square millimeters Technologies 1.6, taking the integer as 1).

　　At a 40% utilization rate, about 2 Category 6 network cables can be worn (201 square millimeters * 0.40/38.44 square millimeters). 2.1, considering the actual operation and signal quality of threading, it is usually not fully worn, but theoretically 2 can be worn).

　　However, it should be noted that in actual operation, the number of threads may be affected due to the flexibility of the cable itself and the bending radius limit in the pipe. In addition, if other types of cables (such as power cords, optical fibers, etc.) need to be worn in the pipe, the number of threads of the six types of network cables may be further reduced.

　　In summary, 16mm PVC wire pipes can usually fit 1 to 2 types of six mesh wires under common space utilization. But the specific number also needs to be determined according to the actual specifications of the network cable, the bending radius of the wire pipe, and the specific needs of threading.